Does Your Water Pump Need Servicing?

If you have a water pump, sewage pump, centrifugal that needs repair, we can take care of it for you at BDS Engineering New Delhi India. We can repair all pumps, from the smallest submersible pumps to the largest industrial or waste water pumps. So, how do you know if your pump does need to be repaired or serviced?

At BDS Engineering, we know a lot about pumps. However, to most people, pumps are just equipment used in pumping water. Most pumps have an impeller or similar mechanism that moves the fluids, which is attached to a motor that supplies the power. Sometimes this impeller become damage and it will not work properly at that time pumps did not gives proper outcome.

Sometimes pump becomes noisy and create noise pollution,” it means there is a serious problem. If you allow a pump to get to a point where it stops working, repairs will almost certainly be more expensive than if you had addressed them earlier. This can also cause a lot more downtime than routine protection and servicing would have. A silent pump that doesn’t work may be a break in the power supply. A pump that buzzes when it is turned on can be an indication of a break somewhere within the motor.

Even the smallest departure from normal service can become a big problem if it isn’t fixed. For example, if your pump keeps tripping the circuit breaker, it is a sign that it has already broken down to a point of being inefficient and drawing too much power. If your pump has any leakage, it should be addressed immediately.

At BDS Engineering water pump solution, we offer full service solutions for any pumps, from the smallest residential pump to the largest waste-water. We can repair and maintain pumps and facility; we can provide onsite repair and maintenance.

To know more about pumps contact with www.bdsblairs.com

Read More

Water Pressure Tank : Where Do I Install A Pressure Tank?

Pressure tanks are a low-priced, simple and effective of gear that will help protect your pump and provide you with a good steady pressure and flow of water for whatever application you need.

Select a pump that has a flow and pressure that is better suited to the job you are trying to do.  A pressure tank can be installed anywhere with the check valve. This allows a pressure pump to build up pressure and let the automatic switch turn it off. When all the taps in the system are shut, then the pressure in the system builds. This can be installed on the suction side or just after the pump on the outlet. The check valve stops water flowing backwards and the pressure dropping when the pumps turn off. The pressure tank also provides a shock absorb er effect in that the rubber diaphragm flexes so that pressure spikes are not as noticeable. It also stops the effect of water hammer. Install a pump with a variable speed motor along with pressure tank.

Booster pumps are usually piston or plunger type compressors. A single-acting, single-stage booster is the simplest configuration, and comprises a cylinder, designed to withstand the operating pressures, with a piston which is driven back and forth inside the cylinder.  A variable speed pump measures the demand for flow and when less is required it slows down to meet the demand. This can be expensive and need a fairly complex piece of electrical equipment to work.

Read More

Pump Pressure Tanks, how they work and how to set them

The pressure tank is probably the most important part pressure pump. There are many diverse ideas out there on what they do and how they work?

So I would like to give details the fundamentals of how a pressure tank operates and what its function what is a Pressure Tank?

A pressure tank is a metal container that can vary in different sizes. Inside the tank there is a rubber diaphragm that divides the tank into 2 halves, the wet half and dry half. BDS Engineering offers Diaphragm pressure tank with the brand name Shyms, Damon and Varem Tank. SHYMS Pressure Tanks provide an efficient cycling to optimal control of pump performance to extending the life of the pump. All materials in contact with water are approved by NSF, IAMPO listing. The dry section has a valve attached to it and compressed air is pumped into it until the pressure is at a certain level. The wet half has a metal threaded outlet attached to it and this is associated to the pipe work for a pressure pump. Pressure tanks are generally made out of steel. The modern steel models are cheap and low maintenance and the diaphragm is set into l. The best part of these is that the bladder is generally replaceable if it bursts and the tank itself lasts for years as it can’t rust. You install a pressure tank anywhere on the delivery or pressurized side of a system. All pressure pump systems need a check valve (or 1 way valve) installed in the pipe work. A pressure pump is a pump with some sort of electrical switch on it which turns the pump off when the system pressure reaches a pre-set point, sometimes this is fixed and sometimes it is adjustable. When your pressure pump is running and a tap on the system is open, the water flows out of the tap.Install a pressure tank on the delivery side of the pump, as shown in the diagram. When this happens it creates a “balloon” of water that can build up in the tank. Once this volume has built up, then the pressure switch turns off and the water then pushes out into the line providing a more constant flow and pressure

Read More

BDS Engineering Announces Sales Release of Hydropneumatic Pressure system

Hydropneumatic pressure system has Twin Booster Pump, a two stage series/parallel pump for high pressure progressive hose lies. HPS can be installed at overhead tank or over the water storage sump which is mostly located in cellar or basement. With an assembly of a logic control panel unit with 2 to 6 pumps and a Pre charged Membrane pressure tank, the system is uniquely easy to operate from installation to everyday surveillance. Only required numbers of pumps are operational at anytime. The control panel variably adjusts the output of the pump for required operations. The HPS meets the demands for higher pump performance for structural fires while retaining the ability to create the high pressures necessary to operate progressive hose lies and the capability of providing low speed pump and roll. The pressure tank is made of Food & Drug Administration and National Sanitation Federation (NSF) listed materials, thus are environmentally safe, Complete and efficient management of water & pressure.

APPLICATIONS:

Hydro Pneumatic systems are in fix drive or Variable Frequency Drive for gated communities, Process Industry, Utility Usage,  Chemical Industry, Food Processing Industry, Multi-storey buildings, Hotels, Schools, Hospitals, high end musical Fountains, Public/municipal water supply and distribution networks to get equal water pressure for all Commercial & Residential Complexes and All type of industries, as they are considered as energy efficient systems resulting in reduction of electrical costs

To offer the greatest range of solutions for engineered packaged pumping systems, BDS Engineering announced the sales release of the Hydro Pneumatic pressure system, an all variable speed controlled pump system utilizing two to three pressure pumps. It also features extremely quiet operation, and can install it easily in the limited space near mechanical components.

Features:

Compact design

Worldwide usage

High consistency

Easy to service and install

Silent Operation

Automatic starts / stops

Read More

Water Pressure Pump: How they work?

Water Pressure pumps, like other machines, are designed to decrease effort and save time. Recently, the manual pumps that were controlled by pumping a lever up and down have been replaced by pressurized and centrifugal water pumps. Because of the diverse demands of water, for maintaining a modern lifestyle, pumps are in high demand. People have a preference to use good quality, long-lasting water pumps that are more dependable to deliver sufficient water for multi-purposes.

Major Components of Pressure Pump

• Impeller
• Motor
• Reservoir  
• centrifugal pump
• pressure switch

Working system

• Impeller: The impeller is what pumps water into the contoured chamber and the water leave the Supply depot with a lot of pressure because of the contoured design
• Pressure Tank: The pressure tank is a reserve for extra water, and it in addition preserves the water pressure in the system software
• Pressure is taken care of with the help of a rubber bladder embedded inside of the metal tank which also prevent the water pump from turning on and off
• This bladder is furthermore stuffed with an adequate amount of air, so that the equilibrium of the system is taken care of well. This permits water to flow out of the kitchen or bathroom taps at a rational pressure
• Pressurized water pumps must have a pressure switch that electrically upholds the pressure of the entire system. The switch can be adjusted by the owner, but in most situations, it can come preset by the manufacture

BDS Engineering offers a variety of water pressure pump, sewage pump, Dewatering pump, Diaphragm pressure tank, Pressurized Tank, Ro Tank along with pressure pump equipment in all over India. A leading supplier and dealer of pumps in India provide products with the brand name of Blairs, Damon, Shyms pumps and tanks.

For more information contact us through www.bdsblairs.com and info@bdsblairs.com  

Read More

Need Industrial or Commercial Water Booster Pump

Water Booster pumps are used for residential, industrial applications. Water pumps are an integral part of many industries counting water treatment, Hospitals, Showroom and apartment along with in individual house. The main function of these pumps is to raise liquid, water or increase its pressure. They work on the principle of conversion of energy. These pumps convert mechanical energy of the motor into liquid energy. Due to the different functions offered by this equipment, they are divided into many. A water Booster pump mostly designed for industries is called an industrial water pump. Large capability water pumps have the flexibility to quash a fire quickly before it'll unfold. It is obtainable at reasonably priced and the suppliers also give replacement guarantee on the product.

Today, the pumping companies have brought great revolution in the field of pumping systems. Modern day pumping systems ease the lifting of water and other liquids in a number of different facilities.  BDS Engineering dealing in these pumping systems which offer a wide range of products. BDS Engineering considered in the market to be one of the leading traders and suppliers of this highly commendable range of Pressure Pump, RO, Pressure Tank for Industrial & Domestic purpose. The offered variety of products is widely praised for its capability and strength. Think twice before buying an instrument so that you get right tool that you could make use of. A buyer has a lot of options available in the market to make his choice a smart one. Always look at the functionality and usability of a tool before making an opinion on it. Look at the simple mathematics that makes an instrument cost effective. Even choosing a reliable pumping company is of great help when you are looking for a superior quality water pump. Before using any type of pump, you must follow the instructions of the manufacturer thoroughly.

While selecting the right kind water pumps, one must look for the following features:

Pumping pressure

Power consume

Full expulsion flow

Maximum output

Discharge size

Read More

Water Pressure Booster: Increase Strength of Water Flow

The water pressure booster pump is particularly designed in such a way to deliver high flow rate and enhance pressure of water. Pressure booster is one of the optimum solutions for getting rid of the low pressure conditions. These boosters can be used for both domestic and industrial sectors depend upon your requirements. A water pressure booster pump should be installed by a qualified technician though. It is important to find a requisite service for installation of these boosters.

Previous to installing a pressure booster there are certain circumstances to be taken care of that are responsible for the pressure of the water supply.

• Checking the plumbing system
• Characteristics of Pump
• Installation system

Generally pressure of water is defined as the rate of water flow. Installing a pressure booster system is considered as one of the immediate solutions that can be simply adapted devoid of any fuss. It is highly recommended to check on the whole plumbing system previous to installing the booster pumps. Consequently increase in the rate of water pressure can help u to deal by the low pressure situations.

Selection of a pressure water pump should be opted after discussing all the characteristics with dealer or supplier of Booster Pump along with checking the piping network. Find the best supplier from the market which is dealing in pumping system. You can take the help of a professional to install an adequate solution provide by the dealers. Not only will they install it for you, in the approved manner, they can be sought after if the pump is ever in need of repair in the future.

Read More

Get a fine quality with High performance range Jet Booster Pump

Jet Booster Pump

BDS Engineering provides more than a few of water treatment products Jet Booster Pump with automatic pump controller is suitable for distributing water under pressure in rural housing, residential housing, and gardens, light industrial and small-scale agricultural applications where the incoming municipal water supply pressure is inadequate. Pressure booster Pump is coupled with a Compact designed composed pump, a manometer, a Pressure diaphragm tank, a pressure adjustable switch, dry running protector and a 3 or 5 ways connection in stamped brass.

These pumps should be installed in a covered area, protected against the weather. Self priming jet pump has a very high hydraulic performance and a considerable pressure capacity. They are very silent and reliable. Our expert installation team will install your pump quickly and professionally.

The special operating system makes our centrifugal pumps an appropriate solution in all cases where water flow rates do not ensure suitable operating pressures.

PERFORMANCE RANGE

• Flow rate up to 225 I/min.(13.5 m3/h)
• Head up to 60 m

OPERATING LIMITS

• Suction lift up to 9 m
• Fluid temperature up to 60°C
• Maximum ambient temperature 40°C

STRUCTURAL CHARACTERISTICS

• Pump body: Cast Iron
• Pump body cover: Stainless steel
• Motor Support: Aluminum
• Impeller: Brass
• Pump flange: Stainless steel
• Shaft with rotor: Stainless steel
• Mechanical seal Carbon/Ceramic

Read More